The use of hydraulic chuck（Technical Department）

The use of hydraulic chuck:
First, three-jaw Select soft jaws, the installation must be symmetric; turning, three-jaw install size turning to material diameter size (claw release the state are turning out, and then stepped up the state turning again); according to the material of the outer shape and material adjustment the spindle chuck pressure value; material is relatively soft workpiece thin-walled pressure on the line in the 0.8 - 1.2 (cutting force is not too large). the opposite pressure optional 1.5 - 2.0;


Taian Haishu Machinery Co., Ltd.
Technical Department
May 21, 2013